Steel roofs, cost compared with tile

**More Volts Igor** · 12-05-2008, 10:31 PM

This question has been asked on another Thai forum, since I too am interested, and this site seems to have far better reports regarding construction, I'll ask it here

Our love-nest (retirement home) is to have Ayutthaya (central Thai) style dual-slope roofs, the architect has drawn these using tile.

I was wondering about using steel roof panels similar to Colorbond COLORBOND® steel with a spray-on insulation/sound deadening layer. We ought to be able to use a lighter structure because the material is lighter.

Anyone actually used this system in Thailand? Is it cheaper than tile? Comments?

EDIT To add quote tags.

**dirtydog** · 12-05-2008, 10:39 PM

Will work out about 25 percent cheaper if they have spray on foam insulation there.

**Bluecat** · 28-05-2008, 07:50 PM

Originally Posted by dirtydog

Will work out about 25 percent cheaper if they have spray on foam insulation there.

I'm not sure these days because well, steel prices went through the roof...

**peterpan** · 13-05-2008, 05:46 AM

There is a company producing long run metal insulated roof panel.
Searched but can't find it, I have a brochure somewhere here, will have a look today.
As mentioned in the OP the other consideration is that long run roofing is much lighter than tiles so less structure required to support.

**Smithson** · 13-05-2008, 10:57 AM

Labor would also be cheaper for a steel roof. About the insulation, how effective is the sound deadening? This seems to be the biggest draw back to steel roofs.

What is the price per meter of colorbond here?

**matsalleh** · 13-05-2008, 11:32 AM

Originally Posted by Smithson

Labor would also be cheaper for a steel roof. About the insulation, how effective is the sound deadening? This seems to be the biggest draw back to steel roofs.

What is the price per meter of colorbond here?

We removed that steel roof on the patio after the first weeks in the rainy season! Was like the sound of hundreds of little drummers when the rains were strong!

**Marmite the Dog** · 13-05-2008, 10:52 AM

Originally Posted by peterpan

There is a company producing long run metal insulated roof panel.

How long? Cut to fit?

The longest I found was only 4m. I want 20m.

**VocalNeal** · 13-05-2008, 11:21 AM

I was wondering about using steel roof panels similar to Colorbond COLORBOND® steel with a spray-on insulation/sound deadening layer.

I was at Arcitect 08 and there was a couple of roofing booths with pre insulated steel panels, just instal no spraying necassary. Sorry as I was not looking for roofing I didn't get a brochure.

There was also a booth selling plastic artificial grass roofing if that is your thing

**Smithson** · 13-05-2008, 11:33 AM

I was told that even if you used steel, the building dept requires the structure be strong enough to support tiles. Has anyone heard of this?
'
Sounds strange to me, but then it seems so many buildings here have too much structural support.

**dirtydog** · 13-05-2008, 11:50 AM

No, you misunderstood what was told to you in the translation.

Originally Posted by Smithson

the building dept requires the structure be strong enough to support tiles.

**Smithson** · 13-05-2008, 01:01 PM

Originally Posted by dirtydog

No, you misunderstood what was told to you in the translation.

Originally Posted by Smithson

the building dept requires the structure be strong enough to support tiles.

Actually it was a farang who told me, but I thought it was BS.

**Panda** · 13-05-2008, 11:50 AM

Thailand

They have a factory in Rayong.

**dirtydog** · 13-05-2008, 12:40 PM

Originally Posted by Marmite the Dog

The longest I found was only 4m. I want 20m.

Who is going to set up a factory and allow 20 meters run off space from the press machine, How will they transport these sheets? How much damage will be done to them as they are lifted onto the roof? How many people would it take to get it up onto the roof? Not due to the weight but due to how flexible it is and long and how easily damaged it would be.

**Panda** · 13-05-2008, 12:54 PM

20 meters seems excessive. I think you can get 8 meter lengths.

**Texpat** · 13-05-2008, 12:58 PM

Why not just glue 4 of them together?

Something about a steel roof in Thailand that makes me say ... no.

With the high humidity, torrential downpours, frequent lightening, blazing sunshine and other factors, I'd stick with tile (ceramic).

**Panda** · 13-05-2008, 01:43 PM

Originally Posted by Texpat

Why not just glue 4 of them together?

Something about a steel roof in Thailand that makes me say ... no.

With the high humidity, torrential downpours, frequent lightening, blazing sunshine and other factors, I'd stick with tile (ceramic).

Same climate here in Oz. Lots of them around here and have been for many decades. In fact where I live up here on Cape York just 12 degrees south of the equator (and a cyclone prone area), ALL the roofs are colour bond. Cheapest, strongest and lowest maintenance. Most of the northern hemisphere experts who have never lived in a house with a colorbond roof will try to tell you that metal roofs are hot and noisy in the rain. But modern insulation puts them right on par with a properly insulated tiled roof for both temperature control and noise in rain. AND, besides being stronger and nil maintenance, its a hell of a lot cheaper.

**Smithson** · 13-05-2008, 01:59 PM

Originally Posted by Texpat

Why not just glue 4 of them together?

Something about a steel roof in Thailand that makes me say ... no.

With the high humidity, torrential downpours, frequent lightening, blazing sunshine and other factors, I'd stick with tile (ceramic).

Tiles store heat to be released at night. They require more support, often meaning more concrete columns, which also store heat. There has been a lot of research done in Australia on the use of iron sheets in the tropics.

Tiled roofs are favored by thieves.

Colorbond is the way to go, cheaper and better. The only issue is the noise, but I'm sure this can be dealt with.

In Australia we could order sheeting to fit the lengths of the roof, which means no cutting and no overlaps (the area most likely to corrode).

The largest we ever did was 10m sheets for a factory. There was only 2 of us, dangerous work.

**Panda** · 13-05-2008, 02:17 PM

Originally Posted by Smithson

Originally Posted by Texpat

Why not just glue 4 of them together?

Something about a steel roof in Thailand that makes me say ... no.

With the high humidity, torrential downpours, frequent lightening, blazing sunshine and other factors, I'd stick with tile (ceramic).

Tiles store heat to be released at night. They require more support, often meaning more concrete columns, which also store heat. There has been a lot of research done in Australia on the use of iron sheets in the tropics.

Tiled roofs are favored by thieves.

Colorbond is the way to go, cheaper and better. The only issue is the noise, but I'm sure this can be dealt with.

In Australia we could order sheeting to fit the lengths of the roof, which means no cutting and no overlaps (the area most likely to corrode).

The largest we ever did was 10m sheets for a factory. There was only 2 of us, dangerous work.

Mate, my house is a low pitched colourbond roof celled on the rake. So its only a few inches between the ceiling and the actual roof sheets. Its insulated with fiberglass and reflective foil. One of my big complaints is that I cant hear the sound of rain on the roof. So I have to go outside to the uninsulated patio to hear that lovely sound.

**peterpan** · 13-05-2008, 02:02 PM

Originally Posted by Texpat

Why not just glue 4 of them together?

Something about a steel roof in Thailand that makes me say ... no.

With the high humidity, torrential downpours, frequent lightening, blazing sunshine and other factors, I'd stick with tile (ceramic).

Not for me Tex, Long run coated steel every time.
The house I posted a photo of in the "buying a new house thread" Was built 30 yrs ago using long run formed sections. I talked with and had a walk around with the current owner last year and its stood up well.
Not a problem with it, absolutely no sign of corrosion.
That was built in an even tougher environment than here, as it has to stand all the environmental rigors that you have mentioned plus salt spray and high wind speeds.
It was built adjacent to a Ocean Marina.

**dirtydog** · 13-05-2008, 01:14 PM

Then he misunderstood what was told to him.

**Marmite the Dog** · 13-05-2008, 02:20 PM

Originally Posted by Smithson

The largest we ever did was 10m sheets for a factory. There was only 2 of us, dangerous work.

In the UK they have the metal (usually zinc plated tin) on a roll and form it on site, so you can have any length you want.

**More Volts Igor** · 13-05-2008, 02:47 PM

All good stuff chaps

Looks like BlueScope Lysaght have exactly what we're looking for, Smartruss (sounds like an athletic support) with Colorbond cladding BlueScope Lysaght Thailand

Panda, is your roof insulated with a spray on job or seperate stuff on a roll (has to be a technical term, brain is not operating)?

**Panda** · 13-05-2008, 03:24 PM

Originally Posted by More Volts Igor

All good stuff chaps

Looks like BlueScope Lysaght have exactly what we're looking for, Smartruss (sounds like an athletic support) with Colorbond cladding BlueScope Lysaght Thailand

Panda, is your roof insulated with a spray on job or separate stuff on a roll (has to be a technical term, brain is not operating)?

Not spray on. Just the normal fiberglass stuff attached to a reflective foil.
Wouldnt hurt to do both if the cost permits. And I would go for the thickest insulating matting in the first place rather than wishing you had later.

**Texpat** · 13-05-2008, 03:07 PM

Personal preference, mates.

I wouldn't/didn't put a metal roof on my shed.

**Smithson** · 13-05-2008, 03:49 PM

Originally Posted by Texpat

Personal preference, mates.

I wouldn't/didn't put a metal roof on my shed.

What's wrong with tin sheds? I was quoted 19B per meter for corrugated iron the other day, even if it's the cheapest stuff around, sound really cheap.

Thread: Steel roofs, cost compared with tile

Thread Tools

Display

Hybrid View

Steel roofs, cost compared with tile

Thread Information

Users Browsing this Thread

Posting Permissions