Page 1 of 2 12 LastLast
Results 1 to 25 of 27
  1. #1
    Tiger Bay
    CharleyFarley's Avatar
    Join Date
    Aug 2007
    Last Online
    27-01-2011 @ 01:57 AM
    Location
    aberthin
    Posts
    1,722

    Floor tiling in a small bedroom.

    My concrete house was built 7 years ago with one small en-suite bedroom having a parquet floor laid on top of concrete. Last week I had to rip up the floor after termites had destroyed many parts.

    The room is 3.5 metres square and now I want to tile it. Whilst I probably have to employ locals (family) to do the work, I want to be sure they do it properly.

    I know absolutely fukk all about DIY, so can you advise DD or whoever on how it should be done.

    How long should it take 2 guys to complete ?

    What type of tile to use Grade A or B, ceramic or clay, shiny or not shiny - I don't want to polish the fukker every other day after padding over it with wet feet?

    How much/thick should the concrete base need to be, before laying the tiles?

    Are there any tricks to mixing the mortar?

    I hate that hollow sound you get when a tile has not been laid properly, so I usually bounce a golf baaaaall on every tile after to check, but it ain't foolproof.

    Look forward to your advice everyone.

  2. #2
    anonymous ant
    tsicar's Avatar
    Join Date
    Aug 2007
    Last Online
    03-10-2016 @ 11:05 PM
    Location
    isaan/south africa
    Posts
    2,895
    Quote Originally Posted by CharleyFarley View Post
    My concrete house was built 7 years ago with one small en-suite bedroom having a parquet floor laid on top of concrete. Last week I had to rip up the floor after termites had destroyed many parts.

    The room is 3.5 metres square and now I want to tile it. Whilst I probably have to employ locals (family) to do the work, I want to be sure they do it properly.

    I know absolutely fukk all about DIY, so can you advise DD or whoever on how it should be done.

    How long should it take 2 guys to complete ?

    What type of tile to use Grade A or B, ceramic or clay, shiny or not shiny - I don't want to polish the fukker every other day after padding over it with wet feet?

    How much/thick should the concrete base need to be, before laying the tiles?

    Are there any tricks to mixing the mortar?

    I hate that hollow sound you get when a tile has not been laid properly, so I usually bounce a golf baaaaall on every tile after to check, but it ain't foolproof.

    Look forward to your advice everyone.
    the job should take one person a couple of hours to complete.
    if they "butter" the backs of the tiles, throw them out.
    make sure they they use a NOTCHED trowell to lay the tile adhesive, and MAKE SURE that they use tile spacers between the tiles.
    make sure that they start tiling from the CENTRE of the room so that tiles which have to be cut shorter match on either side of the room.
    of course, they will not do it this way, and they will fuck the job up.
    thais know fukkall about tiling. you are in for a hiding.
    sorry.......

    best way to do it is to contact the tile supplier, or search the net for info, and do the job yourself. it is piss easy, and is the only way you will get the job done right if you live in thailand.
    brrrzzzzt, brrrzzzt!
    beep!. ting, ting
    redirecting, please be patient..........:

    hello, insect!
    brrrzzzt, brrrzzzt..................

  3. #3
    On a walkabout Loy Toy's Avatar
    Join Date
    Jun 2008
    Last Online
    @
    Posts
    30,531
    Quote Originally Posted by CharleyFarley
    Are there any tricks to mixing the mortar?
    Most Thai tilers seem to know basically how to lay tiles but I will offer the following advice and based upon my observation about how they work.

    1. Check how square the room is and make sure if the walls/room is slightly askew start your first run of tiles running parallel with the most visible wall with the last row hidden by the bed or closet. This first run should be laid away from your parallel wall and measured/ positioned so as you can fit the other tiles with minimum cutting. Tsicar's suggestion about starting around the centre of the room is correct.

    2. Make sure they clean the concrete floor thoroughly and remove any loose concrete, dust and any other foreign shit that may affect the bond between the old floor and the new base.

    3. Once the floor is clean and they have placed in position their parallel and level string line spray the floor with water so as to inhibit the existing concrete sponging all the moisture from your base mix.

    4. Depending on what tiles you buy get yourself a plastic garbage bin fill it full of water so as they can soak each tile before it is layed.

    And good luck mate.

  4. #4
    Member

    Join Date
    Jul 2007
    Last Online
    25-07-2023 @ 12:09 AM
    Location
    australia
    Posts
    197
    Since it is in an ensuite get non slip tiles!!
    Cheers johpam

  5. #5
    Thailand Expat
    DrAndy's Avatar
    Join Date
    Nov 2005
    Last Online
    25-03-2014 @ 05:29 PM
    Location
    yes
    Posts
    32,025
    yep, johpam is right, non slip tiles

    as it is a small area, you can buy any tiles you like, it will be cheap

    Thais usually use cement to lay tiles, not adhesive, and they often lay it on a bit thick. Make sure the final floor is level, or below, the adjoining room (lots of bathrooms are below level as they act as wet rooms)

    The tiling will not take long, but it will need leaving for a day before grouting

    choose a grout colour that complements the tiles
    I have reported your post

  6. #6
    Tiger Bay
    CharleyFarley's Avatar
    Join Date
    Aug 2007
    Last Online
    27-01-2011 @ 01:57 AM
    Location
    aberthin
    Posts
    1,722
    Much appreciate all of the above thanks.

    I do remember a great mate ( Bernie ) of mine back in England tiled the floor of our new conservatory, something like 8 by 3 metres, but didn't pay much attention other than watching him cut tiles, and remembering how fukking tired he was at the end of it. I'm pretty sure he did it all in a day.

    These cvunts ( ooops, sorry family ) say two guys , two days.

    I think it is time to get me 'ands dirty.

    It makes me weep to watch these berks slapping your cement around with complete abandon. I like the sound of adhesive, tho one presumably still needs to lay a base of some form , or is the existing concrete sufficient.

    If I sound stupid then it's probably so, as I am a complete dumbfuck in building matters.

  7. #7
    anonymous ant
    tsicar's Avatar
    Join Date
    Aug 2007
    Last Online
    03-10-2016 @ 11:05 PM
    Location
    isaan/south africa
    Posts
    2,895
    Quote Originally Posted by CharleyFarley View Post
    Much appreciate all of the above thanks.

    I do remember a great mate ( Bernie ) of mine back in England tiled the floor of our new conservatory, something like 8 by 3 metres, but didn't pay much attention other than watching him cut tiles, and remembering how fukking tired he was at the end of it. I'm pretty sure he did it all in a day.

    These cvunts ( ooops, sorry family ) say two guys , two days.

    I think it is time to get me 'ands dirty.

    It makes me weep to watch these berks slapping your cement around with complete abandon. I like the sound of adhesive, tho one presumably still needs to lay a base of some form , or is the existing concrete sufficient.

    If I sound stupid then it's probably so, as I am a complete dumbfuck in building matters.
    a good cement based tile adhesive, or a strong mix of cement and fine sand is the right way.
    make BLOODY sure that they use a NOTCHED trowell, though, and that they leave spaced gaps between the tiles.
    your existing concrete base should be fine: you could spend a bit of time chipping nics in it for better adhesion, and as loytoy sed, clean and dust and oil-free.

  8. #8
    Tiger Bay
    CharleyFarley's Avatar
    Join Date
    Aug 2007
    Last Online
    27-01-2011 @ 01:57 AM
    Location
    aberthin
    Posts
    1,722
    Tha's funny...a notched trowel. You've gotta be kidding. I doubt the existence of such a beast in the whole Chiang Rai province.

    I'm going to bed with a smile on my face. Thanks tsicar, hehehehehehe

  9. #9
    Thailand Expat
    DrAndy's Avatar
    Join Date
    Nov 2005
    Last Online
    25-03-2014 @ 05:29 PM
    Location
    yes
    Posts
    32,025
    they all have notched trowels, just beaten up normal ones

  10. #10

    R.I.P.


    dirtydog's Avatar
    Join Date
    Jun 2005
    Last Online
    @
    Location
    Pattaya Jomtien
    Posts
    58,763
    They will use cement and sand, your original floor will not be level and is most likely smooth finished with a steel trowel, this needs chipping to get a good bond for the new tiles, tsicars advice is not suitable for Thailand but for countries that use leveling compound, notched trowels are available here but not needed for this job, tile spacers are not available here.
    Use grade "A" tiles and similar colored grout to your tiles.

  11. #11
    Days Work Done! Norton's Avatar
    Join Date
    Oct 2007
    Last Online
    Today @ 08:47 AM
    Location
    Roiet
    Posts
    34,962
    Quote Originally Posted by dirtydog
    Use grade "A" tiles and similar colored grout to your tiles.
    Suggest you go to your local Homemart. They have a wide, high quality selection of tile.

  12. #12
    Member
    mordred's Avatar
    Join Date
    Jan 2009
    Last Online
    13-05-2011 @ 08:16 PM
    Location
    In a van down by the river
    Posts
    495
    Ever consider using interlocking vinyl flooring over concrete? It comes in many different finishes from colors to tile or wood simulations. You really can't tell it isn't wood. I just put some in my bathroom and it turned out great.

    Here is a site with some information on their vinyl product to give you an idea:

    Karndean Wholesale Vinyl Plank Flooring
    "he who thinks he knows, does not know; he who thinks he does not know, knows." Lao Tzu

  13. #13
    On a walkabout Loy Toy's Avatar
    Join Date
    Jun 2008
    Last Online
    @
    Posts
    30,531
    I like the range of Granito tiles which look like granite, are rectangular or square in shape (I like the 600 x 600 cm) and when down on the floor look top class.

    They range in price from 450 to 1,200 Baht a square metre and are quite easy to lay.

    Most Homepro, Homemart and major hardware stores stock a good range of various surface finishes and with regard to these tiles.

  14. #14
    ความสุขในอีสาน
    nigelandjan's Avatar
    Join Date
    Jan 2009
    Last Online
    @
    Location
    Frinton on sea and Ban Pak
    Posts
    13,336
    If you can wait till I get out in Feb Ill do it for you as I will be a bit bored for 3 weeks while the missus sawattdee ka,s and sabaidee mai,s everyone and their auntie in the local village

  15. #15
    Tiger Bay
    CharleyFarley's Avatar
    Join Date
    Aug 2007
    Last Online
    27-01-2011 @ 01:57 AM
    Location
    aberthin
    Posts
    1,722
    It has to be complete by end of January 2010, so you can understand the intense pressure I am under.

    Anyways I've made a start already and bought two new gleaming trowels to scrape the old glue off the concrete.

    Costs to date : 50 Baht

    The whole area of the rest of the floor (living room, 2 bedrooms ) is done in brown parquet appearance glossy tiles 40 x 40.

    If I can't match them perfectly, which is highly unlikely, then I am looking at a contrasting colour , maybe cream wood-like appearance of the same size. Given that 90% of the floor will be covered by bedroom furniture, my amateurish antics will not be that apparent I hope.

    How do I run a string to ensure parallel runs, especially if I can't get spacers ?

  16. #16
    Thailand Expat lom's Avatar
    Join Date
    Jan 2006
    Last Online
    @
    Location
    on my way
    Posts
    11,453
    Quote Originally Posted by CharleyFarley
    How do I run a string to ensure parallel runs, especially if I can't get spacers ?
    Ehh? You run a thin nylon wire between two fixed points, concrete nails for instance.

  17. #17
    Thailand Expat
    Humbert's Avatar
    Join Date
    May 2009
    Last Online
    08-01-2024 @ 01:10 AM
    Location
    Bangkok
    Posts
    12,572
    Quote Originally Posted by Loy Toy View Post
    I like the range of Granito tiles which look like granite, are rectangular or square in shape (I like the 600 x 600 cm) and when down on the floor look top class.

    They range in price from 450 to 1,200 Baht a square metre and are quite easy to lay.

    Most Homepro, Homemart and major hardware stores stock a good range of various surface finishes and with regard to these tiles.
    This is a very good recommendation. Homogeneous "granito" tiles are available with a polished or honed finish. They do not have any glaze on the surface. The joint space should be minimal so the problem of grout coming loose is minimized.
    In a small room, 30 X 30 or 40 x 40 would look good. The larger the tile the more prone it is to cracking. Lots of styles on the market imported from China and Malaysia. I would add that the tile should be laid in a setting bed of mortar DD described not back buttered.

  18. #18

    R.I.P.


    dirtydog's Avatar
    Join Date
    Jun 2005
    Last Online
    @
    Location
    Pattaya Jomtien
    Posts
    58,763
    ^A tile like that will just highlight what a crappy little room it is in.

  19. #19
    Days Work Done! Norton's Avatar
    Join Date
    Oct 2007
    Last Online
    Today @ 08:47 AM
    Location
    Roiet
    Posts
    34,962
    Quote Originally Posted by lom
    You run a thin nylon wire between two fixed points, concrete nails for instance.
    You a Thai tile layer Lom?

    Thin nylon line would be fishing line, Charley.

  20. #20
    Thailand Expat
    Humbert's Avatar
    Join Date
    May 2009
    Last Online
    08-01-2024 @ 01:10 AM
    Location
    Bangkok
    Posts
    12,572
    Quote Originally Posted by dirtydog View Post
    ^A tile like that will just highlight what a crappy little room it is in.
    Rubbish. There's nothing more unobtrusive than granito.

  21. #21
    Tiger Bay
    CharleyFarley's Avatar
    Join Date
    Aug 2007
    Last Online
    27-01-2011 @ 01:57 AM
    Location
    aberthin
    Posts
    1,722
    I wasn't sure so thats why I asked thinking there may be a simpler way.

    So what size tile for my crappy little room then ? Surely any sort of patterned tile will make it look crappier and littler.

  22. #22

    R.I.P.


    dirtydog's Avatar
    Join Date
    Jun 2005
    Last Online
    @
    Location
    Pattaya Jomtien
    Posts
    58,763
    ^^Plus 40x40 makes a small room look like the broom cupboard it is, smaller tiles make rooms look biggers, don't think granito do 30x30 or smaller.

  23. #23
    Thailand Expat lom's Avatar
    Join Date
    Jan 2006
    Last Online
    @
    Location
    on my way
    Posts
    11,453
    Quote Originally Posted by Norton View Post
    Quote Originally Posted by lom
    You run a thin nylon wire between two fixed points, concrete nails for instance.
    You a Thai tile layer Lom?

    Thin nylon line would be fishing line, Charley.
    Versitality Norton, I can do wood work, metal work, piping, electrics but when it comes to concrete I am only supervising. To messy and doesn't look fun at all..

  24. #24

    R.I.P.


    dirtydog's Avatar
    Join Date
    Jun 2005
    Last Online
    @
    Location
    Pattaya Jomtien
    Posts
    58,763

  25. #25
    Thailand Expat
    Humbert's Avatar
    Join Date
    May 2009
    Last Online
    08-01-2024 @ 01:10 AM
    Location
    Bangkok
    Posts
    12,572
    Many styles are available in 30 x 30, 30 x 40 and 40 x 40.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •