Motor Cycle Parts

**Fondles** · 18-06-2013, 08:44 PM

Originally Posted by Satonic

Originally Posted by Fondles

Originally Posted by Satonic

Originally Posted by Fondles

What parts do you sell Satonic ?

A bit of everything Fondles. A lot of custom parts like rear sets, rad covers, racks etc. Looking to start getting a lot more clothing and accesories this month.

Recently I have also been sourcing used parts for big bikes - fairings, tanks, rims, frames, engines etc.

Can you send me some details on rims and rear sets.

For what bike mate?

No specific bike in mind other than my SR400. let me know what you have with some pics and I'll see what I might be interested in.

**Satonic** · 18-06-2013, 09:45 PM

Normally bike specific when I look mate, there is a warehouse full of used bike parts I choose from so if u can give me a rough idea what you want I'll go and take some pics. Cheers

**Eliminator** · 19-06-2013, 06:51 AM

Satonic, I need a clear windshield for a NSR150 RR if you have one. I have friend that wants a rear wheel for his NSR. Thanks.

**Fondles** · 19-06-2013, 07:21 AM

Originally Posted by Satonic

Normally bike specific when I look mate, there is a warehouse full of used bike parts I choose from so if u can give me a rough idea what you want I'll go and take some pics. Cheers

Used bike parts.........ok how bout a set of upside down forks with tree's/wheel/disc and caliper.

Any parts for an SR400 I would also be interested in.

I gather these parts are not yours and you just go shopping in BKK and buy to resell (to order).

**Satonic** · 19-06-2013, 08:04 AM

^ Ok Fondles, I'll have a look and see what I can find of interest. The used parts are not mine correct, but I have access to a couple of huge warehouses full of stuff. The new / oem / custom parts are generally stocked by myself and a friend.

^^ is the rear wheel the for the rr or the sp Eliminator? Ill let you know by the weekend about the screen.

**FailSafe** · 19-06-2013, 08:10 AM

I doubt you'll find much (if anything) for a '13 14R, but if you ever come across an ECU, I'd be very interested.

**Satonic** · 19-06-2013, 08:13 AM

Yep, I've only seen 3 on the roads!

Have you taken delivery of the beast yet Failsafe?

**FailSafe** · 19-06-2013, 08:26 AM

Originally Posted by Satonic

Yep, I've only seen 3 on the roads!

Have you taken delivery of the beast yet Failsafe?

It's at Red Baron at the moment being modded- they're closed today, but I spoke with their head mechanic yesterday and it should be ready by tomorrow- delivery by this weekend is looking good.

If by some chance you're there tomorrow, please try to take a look at it and let me know if they screwed up anything.

**Satonic** · 19-06-2013, 08:30 AM

Yep closed on Wednesday. I will be there tomo actually, gotta pick up some chain lube so I'll take a look at it for you

If I can get close to it I'll take a couple of pics and send them your way if you like.

**FailSafe** · 19-06-2013, 08:35 AM

Yes, please- that would be great.

**Satonic** · 19-06-2013, 08:53 AM

Originally Posted by FailSafe

Yes, please- that would be great.

No worries

**Eliminator** · 19-06-2013, 10:54 AM

Both of the bikes are RR and thanks for the help.

**supernovadw** · 20-06-2013, 02:02 AM

I doubt there will be anything in Thailand for the bike as they don't even sell it there but I'm after a nice exhaust for my 2013 ZX636.

Cheers!

**Satonic** · 20-06-2013, 12:43 PM

Originally Posted by Satonic

Originally Posted by FailSafe

Yes, please- that would be great.

No worries

PM sent

**Satonic** · 22-06-2013, 02:01 PM

Originally Posted by Fondles

Originally Posted by Satonic

Normally bike specific when I look mate, there is a warehouse full of used bike parts I choose from so if u can give me a rough idea what you want I'll go and take some pics. Cheers

Used bike parts.........ok how bout a set of upside down forks with tree's/wheel/disc and caliper.

Any parts for an SR400 I would also be interested in.

I gather these parts are not yours and you just go shopping in BKK and buy to resell (to order).

Hi mate,

I can get a set of zx6 forks, trees, calipers etc for about 35k, zx12 about 30k. Here's a pic -

Also an engine for the sr about 20k.

Cheers

**Satonic** · 22-06-2013, 02:12 PM

Originally Posted by Eliminator

Satonic, I need a clear windshield for a NSR150 RR if you have one. I have friend that wants a rear wheel for his NSR. Thanks.

Hi mate,

Sorry I can only find a used rear wheel for an nsr 250, I will keep an eye out for you. The screens were too expensive, about 1500 baht if I remember correctly.

Cheers

**Satonic** · 22-06-2013, 06:50 PM

Hi Marmite.

Adjustable, unbreakable levers for your bike (I was told its the same fitment as the cbr250) would be 2800 shipped to you. Here's a pic -

I can get them in the red pictured, silver or black. Excuse the crap phone pic quality please

**supernovadw** · 23-06-2013, 01:56 AM

Originally Posted by supernovadw

I doubt there will be anything in Thailand for the bike as they don't even sell it there but I'm after a nice exhaust for my 2013 ZX636.

Cheers!

I'll take that as a no then I guess? However also after some nice bits for my CRF250L Which I'd imagine will be a lot easier to come across, any nice performance parts minus an exhaust as I have one already and also a bash plate and perhaps even a set of supermoto type wheels.

Thanks

**Satonic** · 23-06-2013, 06:04 AM

^ Sorry I didn't see your post, yeah parts for the zx6 are prob gonna be hard to come by. I can defiantly sort a bash plate for you, what else are you looking for?

Cheers

**Marmite the Dog** · 23-06-2013, 10:01 AM

Originally Posted by Satonic

Hi Marmite.

Adjustable, unbreakable levers for your bike (I was told its the same fitment as the cbr250) would be 2800 shipped to you. Here's a pic -

I can get them in the red pictured, silver or black. Excuse the crap phone pic quality please

Yes, they're the same as the 250s.

I'll give you a shout in a few weeks.

**Satonic** · 23-06-2013, 02:49 PM

Ok mate, the all black ones looked really nice.

They are the same as the ones here but without any writing -

http://www.1000rr.net/forums/riders-...cbr1000rr.html

Cheers

**Marmite the Dog** · 23-06-2013, 03:11 PM

^ They look the business and yes, I'd get black. The price seems fair too.

**supernovadw** · 23-06-2013, 03:19 PM

Originally Posted by Satonic

^ Sorry I didn't see your post, yeah parts for the zx6 are prob gonna be hard to come by. I can defiantly sort a bash plate for you, what else are you looking for?

Cheers

No problems! Well a bash plate, some hand guards and any nice performance parts you may come across? Also possibly interested in a bigger front brake setup and some supermoto wheels.

Cheers

**Satonic** · 23-06-2013, 03:38 PM

Ok, I will get on to that tomo and let you know prices. The handguards are on my website. I also know of a performance kit that consists of cams, a larger throttle body and an ecu. If memory serves me correct they cost about 20k.

Cheers

**Satonic** · 23-06-2013, 04:38 PM

Originally Posted by supernovadw

Originally Posted by Satonic

^ Sorry I didn't see your post, yeah parts for the zx6 are prob gonna be hard to come by. I can defiantly sort a bash plate for you, what else are you looking for?

Cheers

No problems! Well a bash plate, some hand guards and any nice performance parts you may come across? Also possibly interested in a bigger front brake setup and some supermoto wheels.

Cheers

Super moto wheels I can do for about 10,000 for the complete wheels (rim & hubs) choice of colours or with tires about 15,500.
Bash plate I'm waiting for my supplier to give me a call back, he only has the Zeta ones at the moment and they are about 4000.

Thread: Motor Cycle Parts

Thread Tools

Display

Thread Information

Users Browsing this Thread

Posting Permissions